GE IS200ECTBG1ABB Excitation Contact Terminal Boards

GE IS200ECTBG1ABB Excitation Contact Terminal Boards  Specification

Product Type:Video Driver Board
Model Number:DS3800HVDB1K1G
Brand:GE
Compatibility:Mark IV Systems
Operating Temperature Range:-20°C to 60°C
Power Consumption:12VDC, 0.5A
Dimensions (WxHxD):178mm x 101mm x 51mm
Weight:0.2kg

Demi is always online！welcome to call for inquiry！

About the GE IS200ECTBG1ABB Excitation Contact Terminal Boards 

Model number IS200ECTBG1ABB is one of the Excitation Contact Terminal Boards produced by General Electric as part of the Mark VI series. This model is one of the units within the first group of ECTB models. The two groups are ECTBG1 and ECTBG2. The IS200ECTBG1ABB model, as part of the ECTBG1 group, can only be used in redundant mode. Each board, no matter if in the first or second group of ECTB models, the board will contain two trip contact outputs, which will drive a customer lockout, as well as four Form-C relay contact outputs, controlled by an attached EMIO board. There are also auxiliary contact inputs, six in total, which will be wetted (powered) with 70 volts of direct current from the ECTB board. When being used redundantly, as this model will, the power will come from M1 and M2 power supplies. 

The primary manual that will be used when operating the IS200ECTBG1ABB model is the GEI-100457, but as that model is not readily available, the best manual to use, at least for information on the model, and some of its contact inputs and outputs, is the GEH-6632 Instruction Guide. The GEH-6632 guide references the other boards in the Mark VI model that the IS200ECTBG1AAA unit can be used with. The GEH-6632 Manual will also indicate what module the ECTB receives power from, which will be the EPSM module, which has the M1 and M2 power supplies.

Frequently Asked Questions

Q:What modules is the IS200ECTBG1ABB board used with?

A:There are a number of boards/modules that the IS200ECTBG1ABB unit can be used with. It will work alongside the EPCT, EXTB, and EACF Input-Output (I/O) terminal boards. The IS200ECTBG1ABB board will be managed by the EMIO board alongside the previously mentioned boards. 

Q:What are the 52G and 86G contact inputs on the IS200ECTBG1ABB model used for?

A:The 52G and 86G contact inputs on the board will be monitored and powered by the IS200ECTBG1ABB board. The power provided to these two contact inputs is 70 VDC (volts of direct current). The 86G input is considered a lockout input and will be used during the typical operation of the board. The 52G contact input will give the proper online status to the attached generator.

Q:What are the four general-purpose Form-C contact outputs on the ECTB model used for?

A:The Form-C contact outputs are used for outputs such as the 94EX and 30EX outputs, as well as others. Each relay used alongside these outputs requires a coil current, and the status of a relay auxiliary contact will also be monitored. 

Our Serves

Quick response：24/7 Online Service
Quick supply：large in stock,ship today
PACKING: Packing is factory seal
SHIPPING: DHL,FEDEX,TNT,UPS
Warranty :  1 year Warranty

Our Company

Our company has many products in stock,which are immediately available.new and original package in stock with one year warrany.If you purchase one more parts from us,we can make a discount to you.So please contact our manager Demi Email:sales8@askplc.com

Our main products: Bently Nevada , Honeywell , Triconex , Siemens Moore , ICS Triplex , GE Marke , Ovation , Yokogawa 

Best-selling modules