Description

⚛ Brand new ⚛ In stock ⚛ Competitive price

Reach out to John Yang for assistance.

Whatsapp/Mobile⇔+86 18150117685

⚛ Essential Parameters

Signal Input Channels: 8 × analog input channels (4–20 mA DC, for pressure/temperature/flame detection); 12 × digital input channels (24 V DC, for status signals)
Signal Output Channels: 6 × analog output channels (4–20 mA DC, for actuator control); 8 × relay output channels (250 V AC/5 A, for ignition/fuel valve control)
Regulation Algorithm: Advanced PID control; adaptive air-fuel ratio optimization algorithm
Flame Detection Support: Compatible with UV flame detectors, infrared flame sensors
Isolation Performance: Channel-to-channel isolation ≥ 1 kV AC; Input-output-to-power isolation ≥ 2 kV AC
Communication Interface: GE Mark VIe backplane bus; optional RS485 (Modbus RTU)
Operating Voltage: 24 V DC (redundant power input supported)
Power Consumption: Typical 14 W; Maximum 20 W
Degree of Protection (IP Rating): IP20 (rack-mounted for control cabinet installation)
Operating Temperature Range: -20 °C to +60 °C
Storage Temperature Range: -40 °C to +85 °C
Relative Humidity: 5% to 95% (non-condensing)
Vibration Resistance: 5–2000 Hz, 1.5 g acceleration (complies with IEC 60068-2-6)

⚛ Key Benefits

· Lower your maintenance and support expenses

· Guarantee long-term availability of automation spare parts

· Benefit from a large and ready-to-ship inventory

· Experience reliable, door-to-door technical inspection and support

⚛ Why Choose Us

Guaranteed Authenticity & Quality

We provide 100% genuine products with full quality assurance and highly competitive prices.
If you ever receive a counterfeit product, please contact us immediately! We will cover the shipping cost and send you a replacement at no charge.

Thoughtful & Professional Service

Our dedicated after-sales team ensures prompt and professional support to address any issues or questions you may have.

Fast & Reliable Shipping

With large quantities in stock, we are able to ship your orders immediately, ensuring minimal waiting time.

⚛ More products

SPDSI13	SPASO11	SNAP-PAC-S1
SPCJ4D34-AA	SPBRC300	SNAP-AIV-8
SPD36006-00	SPCJ4D34-AA	SNAP-AIMA-4
SPIDER 5TX	SP-151140	SMCM4-AI
SPNPM22	SNAT7780	SKP326-2
SR1220E2	SNAT608CMT	SK3325024
SR1B-045N-1KC	SNAT601TAI	SINT4610C
SSN-BG89A	SNAT 4041	SIM-275A
SGM-08A3FJ62	SDV144-S53	S-D-010.355
SG2K-1T	SDO204	SCTUST21
SEC402-51 S1	SDN-DR1-025	SCT202
SDV541-S53 S3	SDM010	SC86-4CM0

NOTE: Sales Plc Limited supplies new and surplus industrial products, backed by established procurement channels to secure reliable sources for such items. This website is not authorized, approved, or endorsed by any of the referenced manufacturers, trademark holders, or brand owners. Our company is not an official distributor, authorized dealer, or designated representative of the products displayed on this platform. All product names, trademarks, brand names, and logos used on this site are the exclusive property of their respective rights holders. The use of these identifiers in product descriptions, illustrations, or sales materials is solely to accurately identify the products offered and does not imply, suggest, or establish any form of affiliation, partnership, authorization, or endorsement by the relevant rights holders. Sales Plc Limited operates independently, assumes sole responsibility for all products sold through this website, and has no legal association with the original manufacturers or trademark owners.

Hot Tags : IS200EACFG2ABB GE IS200EACFG2ABB IS200EACFG2ABB Combustion control card IS200EACFG2ABB control card IS200EACFG2ABB PDF IS200EACFG2ABB Combustion card

We found other products you might like!

GE IC693BEM321 I/O Link Master Module

The GE Fanuc IC693BEM321 I/O Link Master Module can be connected with up to 16 I/O link slave modules in order to form a proprietary GE Fanuc link for monitoring and controlling complex processes needing a high response velocity. As many as 1024 inputs and 1024 outputs can be handled from a single master module, making it an ideal solution for adding processing power to preloaded GE Fanuc programmable logic controllers.

GE DS3800HCMC1A1B Circuit Board

The GE DS3800HCMC1A1B circuit board is a high-performance control and monitoring device designed for industrial and process control applications. It features multiple input and output interfaces, ensuring excellent compatibility with various industrial equipment. Its high reliability and durability make it suitable for complex and demanding environments, enabling precise signal control and data processing. This product is for enhancing system efficiency and stability.

GE IC697ALG230 Analog Input Module

The IC697ALG230 is a Series 90-70 PLC, base converter module. This module is formerly manufactured by GE Fanuc, now under Emerson. It is used with IC697ALG440 current expander and IC697ALG441 voltage expander module. This base converter module features Eight (8) differential inputs individually configurable for voltage or current signals specifically, 4-20 mA current input signal and -10VDC / +10 VDC voltage input signals with channel resolution of 16-bits.

GE IC697CPX772 Single Slot Processor

The IC697CPX772 is a Series 90-70 CPU from Emerson, formerly by GE Fanuc. This processor is installed with 96 MHz, 80486DX4 microprocessor and Boolean processing speed of 0.4 microseconds. It supports configuration of up to 2K inputs and outputs of any combination and can accommodate up to 8K analog I/O. It has user memory of 512 KB Slow battery-backed RAM and 256K Flash Memory. It has One (1) RS232 RJ11 Serial port and Two (2) 9-pin D-shell RS485 communication interface. This module is a single slot processor and configured using MS DOS and Windows Programming software package.

GE IS200VTURH1BAA IS200VTURH1B Thermocouple Processor Board

IS200VTURH1BAA is a turbine specific primary trip board developed by GE. It is a part of Mark VI control system. The turbine control board VTUR plays a pivotal role in overseeing various critical functions within the turbine system, each aimed at ensuring safe and efficient operation. Its multifaceted functions encompass a range of monitoring, controlling, and safeguarding measures that contribute to the overall integrity and functionality of the turbine system.

GE UR6TH Digital I/O Module

The GE UR6TH Digital I/O Module is a versatile and reliable component designed for industrial systems. It provides a range of digital input and output capabilities, enabling seamless integration with various control applications. With robust construction, the UR6TH module ensures high performance in demanding environments, offering features like fast response times and extensive signal processing. Its compatibility with GE's control systems makes it an ideal choice for enhancing operational efficiency and reliability in manufacturing processes.

GE IS420YAICS1B Analog I/O Module

IS420YAICS1B is an analog I/O module designed and developed by GE. It is a part of GE Mark VIeS control system. The Analog I/O pack (YAIC) is an electrical interface that connects one or two I/O Ethernet networks to an analog input/output terminal board. The YAIC includes a processor board shared by all Mark VIeS Safety control distributed I/O packs as well as an acquisition board dedicated to the analog input function. The I/O pack supports up to ten analog inputs, the first eight of which can be configured as 5 Vor 10 V or 4-20 mA current loop inputs.

GE IS210AEPSG1BCB Printed Circuit Board

GE Mark VI IS210AEPSG1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE's speedtronic series. The IS210AEPSG1BCB is a board created by GE for the Mark VI system. This system was released as part of the Speedtronic line of gas/steam turbine management systems that was developed and released by General Electric starting with the Mark I in the 1960s and continuing with various iterations until they finished the series with the Mark VI and Mark VI in the 1990s.

GE IS200EACFG2ABB Combustion control card

We found other products you might like!

What Our Clients Say?

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry